Part Number Hot Search : 
SMP11A 557S09 IRFR410 PESD5 74LS373 AD7888 A1183LUA SG2626T
Product Description
Full Text Search
 

To Download SY10E457 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TRIPLE DIFFERENTIAL 2:1 MULTIPLEXER
SY10E457 SY100E457
FEATURES
s Differential D and Q s Extended 100E VEE range of -4.2V to -5.5V s s s s s s VBB output for single-ended use 700ps max. propagation delay High frequency outputs Separate and common select Internal 75K input pulldown resistors Available in 28-pin PLCC package
DESCRIPTION
The SY10/100E457 are 3-bit differential 2:1 multiplexers. The fully differential data path makes the devices ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to ease AC coupling input signals. The higher frequency outputs provide the device with a >1.0GHz bandwidth to meet the needs of the most demanding system clock. Both separate selects and a common select are provided to make the device well suited for both data path and random logic applications.
BLOCK DIAGRAM
PIN CONFIGURATION
H
2:1 MUX
SEL2 D2a D2a VBB
Q0 Q0
D0b D0b SEL0
L
25 24 23 22 21 20 19
SEL1 D1a D1a
D2b COMSEL
D0a D0a
D2b
26 27 28 1 2 3 4 5 6 7 8 9 10 11
18 17
Q2 Q2 VCC Q1 Q1 Q0 Q0
D1a D1a D1b D1b SEL1
H
2:1 MUX
VEE
Q1 Q1
VBB D1b D1b
TOP VIEW PLCC J28-1
16 15 14 13 12
L
D0a
D2a D2a D2b D2b SEL2
H
2:1 MUX
Q2 Q2
L
PIN NAMES
Pin Dn[0:2], Dn[0:2] Function Differential Data Inputs Individual Select Input Common Select Input VBB Reference Output Differential Data Outputs VCC to Output
COMSEL VBB
SEL COMSEL VBB Q[0:2], Q[0:2] VCCO
SEL0
VCCO
Rev.: C
D0a VBB
D0b D0b
Amendment: /1
1
Issue Date: February, 1998
Micrel
SY10E457 SY100E457
DC ELECTRICAL CHARACTERISTICS
VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND
TA = 0C Symbol VBB Parameter Output Reference Voltage 10E 100E Input HIGH Current Power Supply Current 10E 100E VPP (DC) VCMR Input Sensitivity Common Mode Range -- -- 50 -1.5 92 92 -- -- 110 110 -- 0 -- -- 50 -1.5 92 92 -- -- 110 110 -- 0 -- -- 50 -1.5 92 106 -- -- 110 127 -- 0 mV V 1 2 Min. -1.38 -1.38 -- Typ. -- -- -- Max. Min. TA = +25C Typ. -- -- -- Max. -1.25 -1.26 150 TA = +85C Min. Typ. -1.31 -1.38 -- -- -- -- Max. -1.19 -1.26 150 A mA -- -- Unit V -1.27 -1.35 -1.26 -1.38 150 -- Condition --
IIH IEE
NOTES: 1. Differential input voltage required to obtain a full ECL swing on the outputs. 2. VCMR is referenced to the most positive side of the differential input signal. Normal operation is obtained when the input signals are within the VCMR range and the input swing is greater than VPP (min.) and <1V.
AC ELECTRICAL CHARACTERISTICS
VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND
TA = 0C Symbol tPLH tPHL Parameter Propagation Delay to Output D (Diff) D SEL COMSEL Within-Device Skew Duty Cycle Skew tPLH-tPHL Minimum Input Swing Rise/Fall Time 20-80% Min. 375 325 350 375 -- -- 150 150 Typ. 475 475 500 525 40 10 -- 275 Max. 650 700 725 750 -- -- -- 450 TA = +25C Min. Typ. 375 325 350 375 -- -- 150 150 475 475 500 525 40 10 -- 275 Max. 650 700 725 750 -- -- -- 450 TA = +85C Min. Typ. 375 325 350 375 -- -- 150 150 475 475 500 525 40 10 -- 275 Max. 650 700 725 750 -- -- -- 450 ps ps mV ps 1 2 3 -- Unit ps Condition --
tskew tskew VPP (AC) tr tf
NOTES: 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Duty cycle skew guarantee holds only for differential operation when the delays are measured from the cross point of the inputs to the cross point of the outputs. 3. Minimum input swing for which AC parameters are guaranteed.
PRODUCT ORDERING CODE
Ordering Code SY10E457JC SY10E457JCTR SY100E457JC SY100E457JCTR Package Type J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial
2
Micrel
SY10E457 SY100E457
28 LEAD PLCC (J28-1)
Rev. 03
3
Micrel
SY10E457 SY100E457
MICREL-SYNERGY
TEL
3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA
FAX
+ 1 (408) 980-9191
+ 1 (408) 914-7878
WEB
http://www.micrel.com
This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. (c) 2000 Micrel Incorporated
4


▲Up To Search▲   

 
Price & Availability of SY10E457

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X